|
NLC103-232
Ruggedized
GPS/GPRS Intelligent
Tracking and Navigation module |
 |
| |
 |
| datasheet |
|
|
The automotive grade NLC103-232 module has been designed to provide accurate
and reliable navigation information trough a RS-232 link.
Based on the Copernicus™ high performance GPS chip, it delivers accurate
position information, even in poor signal level environments (tree foliage,
urban
canyons). |
| The latest Enfora GPRS technology has been integrated in this module. It
allows you to track vehicles or beacons (data reported: position, speed,
internal temperature, 3D accelerometer data).The NLC103-232 is an ultra-low
power embedded tracking and reporting system. |
| Upon request, other advanced features could be integrated in the NLC103-232
to interface with your system without the need to develop your own functions. |
- Very-high sensitivity of -160dBm, enabling high performance in low
level signals environments.
- Time to get first fix information is around 38s (cold start).
- Quad Band GPRS modem, configurable in UDP or TCP mode. E-mails
and SMS can also be sent to report status of the module.
- A configurable RS232 or RS422 serial port can be accessed for monitoring
and control : NMEA and Trimble TSIP & TAIP
protocol.
- Accurate PPS (pulse per second) signal (±60ns) available
on SUB-D9 front panel. RS232, RS422 or TTL level.
- Active antenna is voltage selectable : 3.3V or 5V (patented).
- Back-up capacitor with an autonomy of 30 days for hot start-up after
a power cut.
|
- 3D accelerometer for detection of motion, shocks, vibration.
- Fully programmable standby mode with less than 0.1µA power consumption
(patented). Wake up by internal RTC or external event.
- Data logging: position, speed, time, internal temperature and accelerometer
data backed-up to a 2Mega EPROM: up to 15 000 positions. Programmable
status LED on front panel.
- Logic and analog input/output for your specific applications.
- Customizable firmware to fit your requirements.
- Firmware upgraded directly via RS232 link.
|
- Metal housing, ruggedized and compact.
- RS232/RS422 port is 15kV ESD protected +60V
fault protected.
- Protection against short circuit and over-voltage on the antenna.
- Robust power supply, protected against transients and reverse polarity.
|
- Connectors are compliant with automotive standards.
- The NLC103-232 module has successfully completed compliance testing in
accordance with the
 directive.
|
| Performance Specifications |
| GPS Receiver : |
12-channel, continuous tracking receiver |
| Sensitivity: |
Tracking: –160 dBm |
| Accuracy: |
Horizontal: <2.5 meters (50%), <5 meters (90%)
Horizontal with SBAS: <2 meters (50%), <4 meters (90%)
Altitude: <5 meters (50%), <8 meters (90%)
Altitude with SBAS: <3 meters (50%), <5 meters (90%)
Velocity: 0.06 m/sec (nominal)*
PPS (Static): ±60 nanoseconds rms |
| Acquisition: |
Hot start: 3 seconds (90%)*
Warm start: 35 seconds (90%)*
Cold start: 38 seconds (90%)* |
| GPRS Modem: |
Radio Frequency : 850 / 900 / 1800 / 1900 MHz |
| Transmit Power: |
Class 4:2W, Class 1: 1W |
| Functions |
GPRS class 10, MS, E-mail |
| * Aerial field cleared |
| Environmental Specifications |
| Operating temp: |
–40°C to +85°C |
| Storage temp: |
–55°C to +105°C |
| Humidity: |
90% non-condensing |
| Dimensions (mm) |
112 x 91 x 26 |
| Weight |
270 grams |
| Power Supply: |
| Input Voltage: |
12/24 VDC, automotive (A option)
9 to 50 VDC for industrial (J option) |
| Power consumption: |
Run: 40mA max @ 12V
Standby: <0.1µA |
| Interfaces |
| Antennas: |
GPS: SMB FAKRA, GPRS: SMA |
| Remote RS232/RS422: |
SUB-D9, 38400/8/None/1 (factory setting, user configurable) |
| Protocols: |
In/Out: NMEA 0183v3.0, TSIP, TAIP, AT commands, proprietary |
| Ordering Part Number |
| The factory standard part number is
:
NLC103-232
Serial interface:
·
232 : RS-232 (default)
·
422 : RS-422
|
|
