 |
| datasheet |
|
48Pro
Universal ISP Programmer |  |
The 48Pro is a universal 48pin driver, PC based programmer
with ISP capabilities with USB 2.0 and parallel connectivity. The 48Pro
is built to meet the demands of development labs and field engineers
for universal programming.
Supporting over 22,000 devices with new support being added monthly,
the 48Pro can program without the need for a family-specific
module, giving you the freedom to choose the optimal device for your
design. Using the built-in, in-circuit serial programming (ISP) connector,
the programmer is able to program ISP compatible chips in circuit. |
- FPGA based totally
reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down
and read
capability for each pin of the socket. Advanced pindrivers incorporate
high-quality high-speed circuitry to
deliver signals without overshoot or ground bounce for all supported
devices. Pin drivers operate down to
1.8V so you'll be ready to program the full range of today's advanced
low-voltage devices
- The programmer performs device insertion tests and contact checks
before device programming. These
capabilities, supported by overcurrent protection and signature-byte
check help prevent chip damage due
to operator error
- Built-in protection circuits eliminates damage to programmer and/or
device due to environment or
operator failure. All the inputs of the 48Pro programmer, including
the ZIF socket, connection to PC and
power supply input, are protected against ESD up to 15kV
- Performs
programming verification at the marginal level of supply voltage,
improving programming yield
and guarantees long data retention
- Various socket converters are available to handle device in
PLCC, SOIC, PSOP, SSOP, TSOP, TSSOP, TQFP, QFN,
SDIP, BGA and other packages
|
- Programmer
is driven by an easy-to-use control program with pull-down
menu, hot keys and on-line help. Selecting of device is performed by
its class,
by manufacturer or simply by typing a fragment of vendor name and/or
part
number
- Standard device-related commands (read, blank check, program, verify,
erase)
are boosted by some test functions (insertion test, signature-byte
check), and
some special functions (auto-increment, production mode - start
immediately after insertion of chip into socket)
- All
known data formats are supported. Automatic file format detection
and
conversion during loading of file
- The rich-featured auto-increment function enables one to assign
individual
serial numbers to each programmed device - or simply increments
a serial
number, or the function enables one to read serial numbers or
any
programmed device identification signatures from a file
- The software also provides extensive information about programmable
devices including detailed drawings of all available packages.
The software
also provides explanations of chip labelling (prefixes and suffixes)
for each of
the supported chips
- The software provides full information for ISP implementation:
Description of
ISP connector pins for currently selected chip, recommended
target design
around in-circuit programmed chip and other necessary information
- The remote control feature allows the PG4UW software to be
controlled by
other application – either using .BAT file commands or
using DLL file
- Jam files of JEDEC standard JESD-71 are interpreted by Jam
Player. Jam files
are generated by design software which is provided by manufacturer
of
respective programmable device. Chips are programmable in-ZIF
or through
ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface)
- VME files are interpreted by VME Player. VME file is a compressed
binary
variation of SVF file and contains high-level IEEE 1149.1 bus
operations. VME
files are generated by design software which is provided by
the manufacturers
of respective programmable devices. Chips are programmable in-ZIF
or
through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG)
interface)
- Multiple devices are possible to program and test via JTAG
chain: JTAG chain
(ISP-Jam) or JTAG chain (ISP-VME)
- Multiple 48Pro programmers can be connected to the same PC
(through USB
port) achieving an extremely powerful multiprogramming system,
which
support as many chips, as are supported by 48Pro programmer
and without
obvious decreasing of programming speed. Concurrent multiprogramming
is
also supported allowing each programmer to work independently.
If
necessary, each programmer can simultaneously program a different
chip
- Keeping your programmer software up to date can be a costly
business with
some programmers. Dataman offers completely FREE software updates
whenever
you need them. The latest software is always available from
our website
|
The 48Pro supports over 22,000 of the most popular
devices in use
today - with future devices being added monthly. 48Pro coverage
includes the following device types:
|
Programmer,
in ZIF socket
- BI-PROM
- EPROM
- EEPROM
- EPLD
- CPAL
|
|
- NVRAM
- PAL
- PEEL
- PLD
- MICROCONTROLLERS
|
Programmer, through ISP connector
- PLD
- MAX
- Serial E(E)PROM
- MICROCONTROLLERS
|
|
| Programmer |
| |
USB 2.0 port |
| |
FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate |
| |
On-board intelligence: powerful microprocessor and FPGA based state
machine |
| |
Three D/A converters for VCCP, VPP1, and VPP2, controllable rise
and fall time |
| |
VCCP range 0..8V/1A |
| |
VPP1, VPP2 range 0..26V/1A |
| |
Autocalibration and Self test capability |
| |
Protection against surge and ESD on power supply input, parallel
port
connection |
| ZIF socket, pindriver |
| |
48-pin DIL ZIF socket accepts both 300/600 mil devices up to 48-pin |
| |
Pindrivers: 48 universal |
| |
VCCP/VPP1/VPP2 can be connected to each pin |
| |
Perfect ground for each pin |
| |
FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on
all pindriver
pins |
| |
Analog pindriver output level selectable from 1.8 V up to 26V |
| |
Current limitation, overcurrent shutdown, power failure shutdown |
| |
ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV
contact) |
| |
Continuity test: each pin is tested before every programming operation |
| ISP connector |
| |
10-pin male type with missinsertion lock |
| |
5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level
H selectable
from 1.8V up to |
| |
5V to handle all (low-voltage including) devices |
| |
1x VCCP voltage (range 2V..7V/100mA), can be applied to pins 1,
3 |
| |
Programmed chip voltage (VCCP) with both source/sink capability
and
voltage sense |
| |
1x VPP voltage (range 2V..25V/50mA), can be applied to pins 2,3,4,6,8,10 |
| |
Target system supply voltage (range 2V..6V/250mA) |
| Package Includes |
| |
48Pro Universal ISP Production Programmer
Dimensions: 160x190x42 mm (16.3x7.5x1.7 inches)
Weight: 0.9kg (1.98 lb) |
| |
Switching Power Supply Adaptor
Input: 100-240V @ 50-60Hz & 400mA
Output: 15V @ 1.0A, 15W |
| |
Moulded USB Cable |
| |
ISP cable |
| |
Diagnostic POD for self test of the programmer |
| |
Anti-dust cover for ZIF socket |
| |
User manual |
| |
Software |
| |
Optional range of adapters and socket converters also available |
|
