 |
| datasheet |
|
48UXP
Universal Device Programmer |
 |
The 48UXP is a universal device
programmer which works through a USB
or parallel port of your PC. It features a
48-pin universal pin driver, and an
expandable TTL pin driver system.
Intelligent hardware, including
microprocessor and FPGA allow it to
program devices you use today, and the
devices of tomorrow.
Optimised for both Laboratory and
production. The 48UXP is
intelligent and is fast & easy to use. |
- Low voltage device support
- Truly Universal 48-pin Programmer
- Connects via USB 2.0/1.1 or Parallel port
- Auto switching power supply 110/240V
- Device Insertion Detection
- Automatic file format detection and conversion
- 3 Year Warranty
- Free software updates
|
| Universal pin driver - No adapter required for DIL devices. |
| 48UXP features universal pin
driver, each
pin can supply four different voltage, ground, it also can be configurable
as TTL high/low levels with pull-high/pulllow,
high-speed clock and high impedance. This advanced pin design lets you
program any DIL device of up to 48
pins without needing an adapter.
|
| Unbeatable programming speed. |
| 48UXP's on-board intelligence reduces system overhead
to a minimum.
The 48UXP has 100% more performance then its predecessor product
in program the high density flash
chip; it can program a Intel 32 M bit flash chip in less then 60 seconds. |
| Programming Speed Test Report. |
| |
Intel 28F320C3B |
AMD 29DL323DB |
| Blank check |
18.6 sec |
18.9 sec |
| Program |
57.5 sec |
76.2 sec |
| Verify |
32.5 sec | 33.0 sec |
| Total |
108.6 sec | 128.1 sec |
|
| Device insertion and contact checks - No mistakes! |
| 48UXP performs device insertion and contact
checks before it programs each device. It can detect poor pin contact
and devices inserted upside down or in the
wrong position. This function protects your pocketbook by preventing
expensive chip damage due to operator error. |
| EPROM and Flash memory ID detection and Search. |
| Many EPROM and Flash memories have a build-in device ID
and manufacturer ID. 48UXP can read the device's ID by press
hot key to detect the ID and compare its
database and determined the chip's correct vendor and product number.
This feature is especially useful with
secondhand chips and devices that have had their part number accidentally
(or intentionally) removed (this function
only applied to 28 pin or 32 pin EPROM and Flash). |
| Auto-sensing and self-programming. |
| To meet mass-production requirements the 48UXP
has
implemented new patented technology in both its hardware and software.
After entering the Mass-production Mode,
the production line operator inserts a device into the ZIF socket. An
LED on the 48UXP indicates the device
is ready and the operator simply removes it and replaces it with a new
one. No formal training is necessary adding
flexibility and saving time and money. In addition, the 48UXP's
auto-sensing feature ensures the device has
been inserted correctly and then automatically programs the device. Furthermore,
in the mass-production mode the
system keyboard is automatically disabled preventing the operator from
making any inadvertent mistakes. |
| Project file save and load. |
| User can create and save a project file which contains
device selection, buffer data and
all the programming set-up options, this project file can be called upon
at any time for future use without having to
go through the setting up procedure again, your design file can easily
pass to production department without making
any mistake. |
| If your memory devices need individual serial numbers with
different increment sequence and
initial value, the 48UXP has an Auto Increment function. This
simply increments the serial numbers in the
buffer each time a new device is inserted. This saves time and money. |
| User-selectable verify voltage, one or two-pass verification |
| 48UXP lets you select the verify
voltage after you have programmed the device, e.g., Vcc, Vcc ¡Ó5%,
Vcc ¡Ó10%. The Vcc voltage can be 2.0V to
6.5V. This feature ensures that your device has been programmed properly,
preventing failures due to programming
errors and ensuring data retention. |
| Non-DIL device support through versatile converters |
| 48UXP's universal pin driver capability lets it
program all 48-pin DIL devices, including all single-chip Micro-controllers,
without DIL-to-DIL adapters. However
there are many different packages beside DIL package, such as PLCC, SOP,
TSOP, QFP and SDIP. We have developed
over 100 different adapters to support these special-package devices. |
| Free software updates via our website |
| Keeping your programmer software up to date can be a costly
business with some programmers. Dataman offers completely FREE software
updates whenever you need them. The
latest software is always available from our website. |
| Universal 44-pin PLCC, QFP, PSOP and TQFP adapter supports 44-pin
chips |
| The universal pin driver on the
48UXP enables you to support all 44-pin chips such as EPLD, EPROM,
Flash, EPLD and Micro-controllers. You
need only one 44-pin universal adapter which eliminates the need to buy
multiple adapters and saves money.
Moreover, different package devices within 48 pins will only require
one adapter. |
| 48UXP support 2.0V ~ 5.0V logic level input/output, and
it can supply
2.0V~21V analog voltage (such as VCC). Support lower then 2.7V low voltage
chip such as 1.8V also possible by
special low voltage adapter on top of its 48 pin ZIF socket. |
The 48UXP supports over 6,000 of the most popular devices
in use today - with future devices being added
every day. 48UXP coverage includes the following device types:
|
- PROM
- EPROM
- EEPROM
- FLASH
- Serial PROM
| | - CDLD
- EPLD
- OTP/MICROCONTROLLERS
- PEEL
|
| Socket and pin driver |
| |
48-pin DIL/ ZIF socket with receptacle for 8-pin to 48-pin 300/
600-mil devices |
| |
Four DACs for Vcc, Vpp1, Vpp2 and Vpp3 with 8-bit resolution. Software
controllable rises time and current
limit protection |
| |
Logic driver supports pull-up/ pull-down or high impedance on all
48 pins with 2.0V-5V level |
| Device support |
| |
Memory : PROM, EPROM, EEPROM, Flash, Serial PROM, NVRAM |
| |
Logic: PAL, GAL, CEPAL, PEEL, CDLD, EPLD |
| |
Others: OTP/Flash Micro-controllers |
| Device operations |
| |
Read, blank check, device insertion/ contact check, verify, checksum,
EPROM ID check, compare, erase chip,
function test, program, memory protect, device configuration setting,
device search, edit buffer, mass
production mode, modify vector, serialization, H/L byte buffer swap,
buffer search |
| PLD vector tester |
| |
Accepts JEDEC test vectors up to 48 pins |
| |
2500V/usec. rise time |
| |
File format conversion |
| |
JEDEC, POF, Binary, Intel HEX, Intel EXT HEX, Motorola S, HP 64000ABS,
Straight Hex and TEKTRONIC Hex,
Automatic detection and conversion |
| Package Includes |
| |
48UXP Universal Production Programmer
Dimensions: 31cm x 17 cm x 4cm (12.2in x 6.7in x 1.6in)
Weight:1.9Kg (4.2lbs) |
| |
FREE SDP-UNIV-44 - universal 44 pin PLCC adaptor |
| |
Manual |
| |
Drivers/Software (Compatible with Windows 9x, ME, NT, 2000 and
XP) |
| |
Moulded USB and Parallel Cable |
| |
Optional range of adapters and socket converters also available |
|