| |
Max-E
Eraser |
 |
|
A robust metal uv eprom eraser, suitable for a production or development
environment. The Max-E is equipped with an electronic starter to extend
the life of the UV tube. The timer can be set from 0 to 60 minutes.
The Max-E will erase 9 devices (28 pins) or 12 devices (24 pins)
simultaneously. Suitable for 220V-240V use only.
|
| Eraser |
| Capacity |
12 devices (24 pins, 0.6"), 9 devices (28 pins), 9 devices
(40 pins) |
| Erasure Time |
Pre-settable up to 60 minutes (mechanical timer) |
| Tube |
| W tube type |
GL-4, 1 Piece |
| W source wavelength |
2537 degree A |
| W intensity |
5000 µW/cm² |
| Tube life |
Approximately 3000 hr |
| Starter type |
Electronic start circuitry (no starter required) |
| Power Supply |
| Power Supply Adaptor |
DC 9V @500mA (2.1 mm plug, positive outside)
|
| Dimensions |
| Length |
240mm (9.4") |
| Height |
85mm (3.3") |
| Width |
95mm (3.7") |
| Weight |
| Weight |
1.2kg (2.6lb) |
| Package Includes |
| |
Max-E Eraser
-Dimensions: 240mm x 85mm x 95mm (9.4in x 3.3in x 3.7in)
-Weight: 1.2kg (2.6lbs) |
| |
User manual |
| |
Power Supply Adaptor: DC 9V @500mA (2.1 mm plug, positive outside) |
|