|
|
MEMPro
Memory Programmer |
 |
40-pin memory programmer with USB 2.0 connectivity.
MEMPro is a small, fast and powerful programmer designed for a huge
range of programmable memory devices.
The MEMPro is built to meet the demands of development labs and field
engineers for specialised programming. |
- 40 powerful TTL pindrivers provide H/L/pull_up/pull_down
and read capability for each pin of socket. Advanced pindrivers incorporate
high-quality high-speed circuitry to deliver signals without overshoot
or ground bounce for all supported devices. Pin drivers operate down
to 1.8V so you'll be ready to program the full range of today's advanced
low-voltage devices.
- The programmer performs device insertion test and contact check
before it programs each device. These capabilities, supported by signature-byte
check help prevent chip damage due to operator error.
- MEMPro programmer performs programming verification at the marginal
level of supply voltage, which improves programming yield and guarantees
long data retention.
- Easily upgradeable to the 40Pro programmer
- Various socket converters are available to handle device in
PLCC, SOIC, SSOP, TSSOP, TSOP and other packages.
|
- Programmer is driven by an
easy-to-use control program with pull-down menus, hot keys and
on-line help. Selection of device is performed by its class,
by manufacturer or simply by typing a fragment of vendor name
and/or part number.
- Standard device-related commands (read, blank check, program, verify,
erase) are enhanced by some test functions (insertion test, signature-byte
check), and some special functions (autoincrement).
- All known data formats are supported. Automatic file format
detection and conversion during loading of file.
- The versatile auto-increment function allows each programmed
device to be assigned an individual or incrementing serial number.
This function also enables the operator to read serial numbers
or device identification signatures from a file.
- The software also provides extensive information about programmable
devices including detailed drawings of all available packages.
The software also provides explanations of chip labelling (prefixes
and suffixes) for each of the supported chips.
- Keeping your programmer software up to date can be a costly business with
some programmers. Dataman offers completely FREE software updates
whenever you need them.
|
The MEMPro supports over 10,000 of the most popular
memory devices in use today - with future devices being added monthly.
MEMPro coverage includes the following device types:
Programmer (ZIF Socket)
- EPROM: NMOS/CMOS, 27xxx and 27Cxxx series, with 8/16 bit data width, full
support of LV series
- EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width,
full support of LV series
- Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series,
with 8/16 bit data width, full support of LV series
- Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx, 59Cxxx, 25Fxxx, 25Pxxx,
NVM3060, 85xxx, 93Cxxx, full support for LV series
- Configuration (EE)PROM: 37LVxx, XC17xxxx, AT17xxx, LV series including
- NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x
series
|
| Base Unit (DAC) |
| |
Two D/A converters for VCCP and VPP, controllable rise and fall
time |
| |
VCCP range 2V..7V/350mA |
| |
VPP range 2V..25V/200mA |
| |
USB 2.0/1.1 compatible interface |
| |
Auto calibration |
| |
Self test capability |
| ZIF socket |
| |
40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600
mil devices up to 40-pins |
| |
Pindriver: 40 TTL pindrivers, specialised GND/VCC/VPP pindriver |
| |
FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on
all pindriver pins; level H selectable from 1.8V up to 5V |
| |
Continuity test: each pin is tested before every programming operation |
| ISP connector (useable after
upgrade to 40Pro) |
| |
10-pin male type with miss insertion lock |
| |
6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level
H selectable from 1.8V up to 5V to handle all (low-voltage including)
devices |
| |
1x VCCP voltage (range 2V..7V/100mA) and 1x VPP voltage (range
2V..25V/50mA) |
| |
Programmed chip voltage (VCCP) with both source/sink capability
and voltage sense |
| Package Includes |
| |
MEMPro Universal Memory Programmer
- Dimensions: 160 x 95 x 35mm (6.3 x 3.7 x 1.4inches)
- Weight: 0.5Kg (1.1lbs) |
| |
Switching Power Adapter
- Operating voltage: 15-20V DC / max. 0.5A
- Power consumption: max. 6W active / approx. 1.4W sleep |
| |
Moulded USB Cable |
| |
ISP cable (useable after upgrade to 40Pro) |
| |
Diagnostic POD for self test of the programmer |
| |
Anti-dust cover for ZIF socket |
| |
User manual |
| |
Software
- Windows 98/ME/NT/2000/XP/2003/XPx64/Vista compatible |
| |
Optional range of adapters and socket converters also available |
|
