 |
| datasheet |
|
IDE Flash Drive 2.5" (FLD) |
 |
| STEC Industrial Grade 2.5" IDE Flash Drives utilize the latest in
solid state storage and are ideal alternatives to lower-capacity (up to 16GB)
IDE hard disk drives due to their higher reliability, greater endurance,
and higher tolerance to industrial application environments. The 2.5" IDE
Flash Drives include a standard 44-pin IDE interface in a rugged aluminum
case and are industrial temperature (-40°C to +85°C) rated making
them ideal for even the harshest industrial application including industrial
PCs, data recorders, and avionics systems.
In addition, STEC also offers value-added services like customized form
factors, testing, custom firmware, software imaging, controlled bill
of materials, customer-specific labeling and serialization, and in-field
support.
|
- Standard 44-pin IDE connector
- True IDE Mode Support
- Built-in Wear Leveling and Block Management for ultra-high endurance
- Built-in ECC Engine: 5-bytes detection, 4-bytes correction
- Built-in power-down data protection
- Temperature Rated for Industrial Use
- Optional Purge, End of Life, Password & Write Protection
|
| SPECIFICATION |
IDE FlashDrive 2.5" |
| INTERFACE |
- 44-pin IDE
- ATA-5 compatible
- Transfer modes:
• PIO 0-6, MWDMA 0-4
• True IDE Mode
|
| CAPACITIES |
128MB - 16GB |
| READ/WRITE PERFORMANCE (MB/s) |
10/7 |
ENDURANCE
Program/Erase Cycles
MTBF
|
• +2,000,000 (Est. 10-Yr+ life in normal operation conditions)
• 8,000,000 hours
|
POWER CONSUMPTION
Sleep/Idle mode
Operating mode |
•
2mA (max)
•
75mA (max) |
| IDE Flash Drive Vs. Mechanical Hard Drive |
| SPECIFICATION |
IDE FlashDrive |
HDD |
| OPERATING TEMPERATURE |
-40º to 85ºC (Industrial) |
5ºC to 55ºC
|
| OPERATING SHOCK |
1500 G |
200 G |
| OPERATING VIBRATION |
20 G |
1 G |
| POWER CONSUMPTION (Typical) |
0.6 W |
2.5 W |
| LATENCY |
less than 0.1 ms |
5.5 ms |
| ACCESS TIME (AVG.) |
1 ms |
8 ms |
| DATA RETENTION |
10 Years |
3 Years |
| NON-RECOVERABLE
ERROR RATE |
4 in 1014 |
4 in 1013 |
|
