 |
| datasheet |
|
IDE Flash Module (IFM) |
 |
Industrial-grade embedded flash storage providing
True IDE support in compact, high capacity designs for space-constrained
applications.
|
STEC Flash Modules provide non-volatile, solid-state storage ideal for
embedded applications. With built-in wear leveling algorithms, on-the-fly
ECC, and no moving parts, Flash Modules provide superior data integrity and
reliability in a compact design. STEC's IFM is a True IDE device (also available
in USB) providing the perfect solution for a variety of embedded applications
including Blade Servers, Point of Sale terminals, Casino Gaming machines,
Single Board Computers, and Networking Equipment, all of which require high-performance,
uncompromising reliability, and a storage solution that lasts for the long
life of these embedded systems.
|
New applications for embedded flash modules are rapidly emerging
due to the low cost per megabyte, lower power consumption, and inherently
greater reliability than rotating hard drives. Most applications running
embedded operating systems such as VxWorks, Windows, XP/embedded, and
Linux don't have large data storage requirements, and a cost savings
can be immediately realized. The standard 40-pin or 44-pin IDE interface
ensures compatibility and eliminates the need for proprietary software
drivers or connectors. STEC's IDE Flash Modules also include built-in
content security that can be implemented via a unique serial number embedded
in the controller firmware. Optional layers of security including write
protection and password-protected secured partitioning are also available.
The vertical oriented IFM is also available with an optional enclosure
for particularly rugged environments or where installation and handling
poses risk of electrostatic discharge (ESD) damage.
|
- IDE: 40 pin & 44 pin
- Unique Serial Number
- Capacity: 128MB - 8GB
- Built-in ECC Engine: 5-bytes detection, 4-bytes correction
- Built-in Wear Leveling
- IC Tower® Stacking Technology
- Commercial and Industrial Operating Temperature Range
|
| SPECIFICATION |
IDE Flash Module |
| INTERFACE |
ATA-5 compatible
Transfer modes:
PIO 0-6, MWDMA 0-4
Supports PC Card Memory
PC Card I/O, and True IDE Mode
|
| CONNECTOR |
40-Pin/44-Pin IDE |
| CAPACITIES |
128MB - 8GB |
| READ/WRITE PERFORMANCE (MB/s) |
10/7 |
DIMENSION
Horizontal (mm)
Low Profile (mm)
Vertical (Standard) |
•
54.35(L) x 12.65(W) x 32.00(H)
•
64.00(L) x 6.80(W) x 27.10(H)
•
54.23(L) x 22.35(W) x 16.33(H) |
POWER CONSUMPTION
Sleep/Idle mode
Operating mode |
•
2mA (max)
•
75mA (max) |
|
